|
|

|
Description:
• Input Voltage - 120/240-VAC
• Output Voltage - Adjustable 280 VAC @ 650 Hz
• Power consumption - 30-watts
• Size - 3.6" x 8.5" x 3.2"
• Weight - 2.5 lb
• Capacity - 100 to 600 square inches of split electrode lamp
• Ground
Fault,
• Open and short circuit protected.
• Color - Black
Made
in the USA

|
2200A Buy $275.00
Description:
• Input Voltage - 120/240VAC
• Output Voltage - Adjustable 280 VAC @ 650 Hz
• Power consumption - 90-watts
• Size - 3.75" x 10.50" x 3.25"
• Weight - 4.0 lb
• Capacity - 600 to 1800 sq inches of split electrode lamp.
• Ground
Fault,
• Open and short circuit protected.
• Color - Black
Made
in the USA
|
2200B Buy $350.00
Description:
• Input Voltage - 120/240VAC
• Output Voltage - Adjustable 280 VAC @ 650 Hz
• Power consumption - 100-watts
• Size - 3.75" x 10.50" x 3.25"
• Weight - 4.0 lb
• Capacity - 1800 to 2600 sq inches of split electrode lamp.
• Ground
Fault,
• Open and short circuit protected.
• Color - Black
Made
in the USA
 |
12KN-X
Series
(A, B, C, D)
Description:
• Input Voltage - 120/240VAC
• Output Voltage - Adjustable 280 VAC @ 650 Hz
• Power consumption - 155 to 650-watts
• Size - 9.2" x 13.4" x 4.0"
• Weight - 7.5 to 15.0 lb
• Capacity: (A)- 2600 to 3100 square inches of split electrode lamp.Buy $650.00
• Capacity: (B)- 3100 to 4800 square inches of split electrode lamp.Buy $750.00
• Capacity: (C)- 4800 to 7800 square inches of split electrode lamp.Buy $850.00
• Capacity: (D)- 7800 to 12,500 square inches of split electrode lamp.Buy $950.00
• Ground
Fault,
• Open and short circuit protected.
• Color - Black
Made
in the USA
|
Made
in USA

|
Control
Modules (Dimming, Flashing) For
600N, 2200 and 12KN series inverters
|
Made
in USA

|
|
Click
Here For Technical Information
|
|
|
|
Variable
Flashing Module
CMD-004
Variable
flashing control interface enables flashing of lamp
at user
set intervals
|
Manual
Dimming Module CMD-002
Rotary
Dimmer switch enables remote dimming.
|
Analog
Interface Module
CMD-001
Analog
dimming. 0 to 10-volt DC signal controls lamp brightness.
|
|
|
|
|
|
|
Rear
view of the 600N inverter showing lamp output and Control
Module accessory plugs.
Similar accessory plug is found on 2200X and 12KN-X Series inverters.
|
Made in the
USA |
|
|
Inverter,
120VAC Only
For
Split Electrode, Flat-lite Panels
|
|
|
|
Description:
• Input Voltage - 120-VAC
• Output Voltage - Fixed 280 VAC @ 650 Hz
• Power consumption - 17-watts
• Size - 5.0" x 4.0" x 1.5"
• Weight - 8 oz
• Capacity - 225 to 500 square inches of split electrode lamp.
• Color - Black
• UL
Note:
No accessory (Control Module) plug available
on this model
|
|
Made in the USA
 |
|
|
DC,
Inverters
For
Split Electrode, Flat-lite Panels
|
|
9-Volt
DC |
|
|
Description:
• Input Voltage - 9 VDC @ 0.1A
• Output Voltage - 225 VAC @ 650 Hz
• Size - 2.25" x 2.25" x 1.0"
• Weight - 4oz
• Capacity - 5 to 12 square inches of split electrode lamp.
• Color - Black
|
|
|
12-Volt
DC |
|
|
Description::
• Input Voltage - **10-18 VDC @ 0.4A
• Output Voltage - Adjustable 100-300 VAC @ 650 Hz
• Size - 2.0" x 2.0" x 1.5"
• Weight - 7oz
• Capacity - 10 to 60 square inches of split electrode lamp.
• Color - Black
|
|
Made in the
USA 
|
|
|
Description:
• Input Voltage - **10-18 VDC @ 0.8A
• Output Voltage - Adjustable 100-300 VAC @ 650 Hz
• Size - 3.0" x 2.0" x 1.5"
• Weight - 13oz
• Capacity - 15-125 square inches of split electrode lamp.
• Color - Black
|
|
Made
in the USA 
|
|
|
Description:
• Input Voltage - * 12 VDC @1.0A
• Output Voltage - 250 VAC @ 600 Hz
• Reverse polarity protection
• No load and short protection
• Size - 6.125" x 2.375" x 1.75"
• Weight - 32oz
• Capacity - 400 square inches of split electrode lamp.
(Works well with panels 275-500 in2)
• Color - White
|
|
| *Also
available in 3, 6, 9 and 24-volt models. (Special order,
25 minimum order. Allow 6-weeks for delivery) |
Made in the
USA
 |
|
|
Inverters
For
Parallel Electrode Panels
|
|
|
EL-150W Buy $375.00
Description:
• Input Voltage - 120/240VAC
• Output Voltage - Adjustable 70-105 VAC @ 600 Hz (For Parallel Electrode
Panel)
• Power consumption - 70-watts
• 15 Flashing / Dimming modes
• Size - 10.625" x 7.0" x 3.25"
• Weight - 5.5 lb
• Capacity - 24x36-inch or approximately 850 sq in.of parallel
electrode panel.
• Color - Silver
• UL, CE |
|
|
|
Description:
• Input Voltage - 120VAC
• Output Voltage - Adjustable 70-105 VAC @ 600 Hz, (For Parallel Electrode
Panel)
• Power consumption - --watts
• Size - 14.25" x 2.75" x 2.25"
• Weight - 3.3 lb
• Capacity - A1 (22.75 x 32.312-inches), or approximately 850 sq inches
of parallel electrode panel.
• Color - Black
|
|
DC12-120PE/D Buy $78.00
For A3 & A4 Panels
Description:
• Input Voltage - 12VDC, includes 120-240vac to 12vdc wall transformer
• Output Voltage - 90 VAC @ 600 Hz, (For Parallel Electrode Panel)
• Power consumption - 12-watts (max)
• Size -8.25" x 2.5" x 1.5"
• Weight - 7 oz
• Capacity - Approximately 95-180 sq inches
• Color - Black
• On/off, dimmer
• Made in USA |
|
| |
| |

Information
is believed to be accurate. We will not be responsible for
errors or misinterpretations of information contained on this
web site. Technical data may change at any time. You make adjustments
or modification to your equipment at your own risk. |
|
Privacy Statement | Return
Policy | Company Info | Warranty
This
page updated 5-7-2008 |